WS2 > What it Provides

WS2 Provides:

• Vacuum Compatible Lubrication
• Maintenance of the dimensional integrity of the substrate to within 0.5 microns (20 millionths) with no build up
• Enhancement of the flow resin due to its low coefficient of friction
• Reduction in part weight. Part is not packed as tight
• Release of parts quicker
• Reduction of pressure and mold wear
• Lower operation temperatures
• The capability to produce more parts per hour
• Reduction of rejects
• An inert, inorganic, non-toxic, non-distortive, non-corrosive lubrication that is resistant to most fuel solvents
• Compatibility with and enhancement of all other lubricants and releasing agents
• Slight delay of corrosion
• Bonding to all metal or plastic materials and platings and can't be removed without eliminating the bonded substrate
• Elimination of material transfer to finished agents
• Application to no. 1 diamond mirror finish ... lense quality
• 100% lubricity throughout the entire mold
• Application into slots or holes as small as .060 inch
• Application to the entire mold surface or only specified inserts, cavities and core pins

WS2 Does not:

• Require heat curing
• Build-up on corners and edges
• Transfers to finished parts, therefore not requiring secondary cleaning for painting, plating etc.